- Home
- Products
- Sample Preparation Equipment
- Electrolytic Polisher/ Etcher


Description
In-situ metallographic has become one of the important NDT tools for industrial inspection system. Over the years demand is observed in the developing countries like India. In current scenario, inâ€situ metallographic is widely accepted in many areas of industries from quality control to life prediction of operating plant structures.
In-situ metallographic is useful where microstructures are prepared to minimize the damage to the material being analysed and at the same time derive metallurgical information.
Application
- Quality control checks for metallurgical industries.
- Life assessment of process plant components, subjected to high temperature damages.
- Reconditioning of the component.
- Risk based assessment of process plant.
- Damage identification & audit.
- Weld quality evaluation for critical application.
Features
Specifications
Model No. | INSIPOL – 2000 |
Supply Voltage | 230V AC, 50 HZ |
Power Consumption | 280W maximum while operating |
Polishing Voltage | 0 - 60V |
Polishing Current | 0 - 3 Amp |
Polishing Timer | 0 - 90 Sec. |
Etching Voltage | 0 - 18V (To be set with sample) |
Etching Current H Range | 0 - 750 milliamps |
Etching Current L Range | 5 - 30 milliamps |
Etching Timer | 0 - 90 Sec. Pump |
Speed Control | Electronic |
Dimensions | 430mm X 330mm X 235mm(LHW) |
Weight | 11 kg. (Approx.) Without electrolyte |
Accessories
Software Description
Download Cataloge
ENQUIRY
Portable Electrolytic Polisher/Etcher


Description
In-situ metallographic has become one of the important NDT tools for industrial inspection system. Over the years demand is observed in the developing countries like India. In current scenario, inâ€situ metallographic is widely accepted in many areas of industries from quality control to life prediction of operating plant structures.
In-situ metallographic is useful where microstructures are prepared to minimize the damage to the material being analysed and at the same time derive metallurgical information.
Application
- Quality control checks for metallurgical industries.
- Life assessment of process plant components, subjected to high temperature damages.
- Reconditioning of the component.
- Risk based assessment of process plant.
- Damage identification & audit.
- Weld quality evaluation for critical application.
Features
Specifications
Model No. | INSIPOL 2000-Lab |
Supply Voltage | 230V AC, 50 HZ |
Power Consumption | 280W maximum while operating |
Polishing Voltage | 0 - 60V |
Polishing Current | 0 - 3 Amp |
Polishing Timer | 0 - 90 Sec. |
Etching Voltage | 0 - 18V (To be set with sample) |
Etching Current H Range | 0 - 750 milliamps |
Etching Current L Range | 5 - 30 milliamps |
Etching Timer | 0 - 90 Sec. Pump |
Speed Control | Electronic |
Dimensions | 430mm X 330mm X 235mm(LHW) |
Weight | 11 kg. (Approx.) Without electrolyte |
Accessories
Software Description
Download Cataloge
ENQUIRY
Lab Electrolytic Polisher/Etcher