- Home
- Products
- Sample Preparation Equipment
- Electrolytic Polisher/ Etcher


Description
In‐situ metallographic has become one of the important NDT tools for industrial inspection system. Over the years demand is observed in the developing countries like India. In current scenario, in‐situ metallographic is widely accepted in many areas of industries from quality control to life prediction of operating plant structures.
In‐situ metallographic is useful where microstructures are prepared to minimize the damage to the material being analysed and at the same time derive metallurgical information.
Application
- Quality control checks for metallurgical industries.
- Life assessment of process plant components, subjected to high temperature damages.
- Reconditioning of the component.
- Risk based assessment of process plant.
- Damage identification & audit.
- Weld quality evaluation for critical application.
Features
Specifications
Model No. | INSIPOL – 2000 |
Supply Voltage | 230V AC, 50 HZ |
Power Consumption | 280W maximum while operating |
Polishing Voltage | 0 - 60V |
Polishing Current | 0 - 3 Amp |
Polishing Timer | 0 - 90 Sec. |
Etching Voltage | 0 - 18V (To be set with sample) |
Etching Current H Range | 0 - 750 milliamps |
Etching Current L Range | 5 - 30 milliamps |
Etching Timer | 0 - 90 Sec. Pump |
Speed Control | Electronic |
Dimensions | 430mm X 330mm X 235mm(LHW) |
Weight | 11 kg. (Approx.) Without electrolyte |
Accessories
Software Description
Download
ENQUIRY
Electrolytic Polisher/ Etcher


Description
In‐situ metallographic has become one of the important NDT tools for industrial inspection system. Over the years demand is observed in the developing countries like India. In current scenario, in‐situ metallographic is widely accepted in many areas of industries from quality control to life prediction of operating plant structures.
In‐situ metallographic is useful where microstructures are prepared to minimize the damage to the material being analysed and at the same time derive metallurgical information.
Application
- Quality control checks for metallurgical industries.
- Life assessment of process plant components, subjected to high temperature damages.
- Reconditioning of the component.
- Risk based assessment of process plant.
- Damage identification & audit.
- Weld quality evaluation for critical application.
Features
Specifications
Model No. | INSIPOL – 2000 |
Supply Voltage | 230V AC, 50 HZ |
Power Consumption | 280W maximum while operating |
Polishing Voltage | 0 - 60V |
Polishing Current | 0 - 3 Amp |
Polishing Timer | 0 - 90 Sec. |
Etching Voltage | 0 - 18V (To be set with sample) |
Etching Current H Range | 0 - 750 milliamps |
Etching Current L Range | 5 - 30 milliamps |
Etching Timer | 0 - 90 Sec. Pump |
Speed Control | Electronic |
Dimensions | 430mm X 330mm X 235mm(LHW) |
Weight | 11 kg. (Approx.) Without electrolyte |
Accessories
Software Description
Download
ENQUIRY
Electrolytic Polisher/ Etcher