- Home
- Products
- Hardness Tester
- Rockwell Hardness Tester
Description
Our BRS-150 Hardness Testers are designed and developed after years of research & experience in this field. All the models are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. These models strictly conform to IS: 1586-2000, BS: 891part 1&2, ASTM-18 for Rockwell test.
Application
Features
Specifications
| Test Loads (Kgf) | 60, 100, 150 (Rockwell) |
| Initial Loads (Kgf) | 10 |
| Max. Test Height (mm) | 295 |
| Depth of Throat (mm) | 148 |
| Max. Depth of Elevating Screw Below Base (mm) | 290 |
| Size of Base (mm) (Approx.) | 475 X 220 |
| Machine Height (mm) | 865 |
| Net Weight kg. (Approx.) | 105 |
Accessories
- Rockwell Diamond Indenter
- Testing Table (Ø 50 mm)
- Testing Table (Ø 40 mm with V" Groove for round Jobs Ø 6 to45 mm
- Steel Ball indenter 1/16”
- Test Block HRC
- Test Block HRB
- Steel Ball Ø 1/16”
- Allen Spanners
- Clamping Device
- Rubber Bellow
- Instruction Manual
Software Description
Download Cataloge
ENQUIRY
Benchtop Hardness Tester
Description
Our BRS Hardness Testers are designed and developed after years of research & experience in this field. All the models are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. These models strictly conform to IS: 1586-2000, BS: 891part 1&2
Application
Features
Specifications
| Test Loads (Kgf) | 60, 100, 150 (Rockwell) |
| Initial Loads (Kgf) | 10 |
| Max. Test Height (mm) | 215 |
| Depth of Throat (mm) | 132 |
| Max. Depth of Elevating Screw Below Base (mm) | 230 |
| Size of Base (mm) (Approx.) | 430 X 180 |
| Machine Height (mm) | 635 |
| Net Weight kg. (Approx.) | 65 |
Accessories
- Rockwell Diamond Indenter
- Testing Table (Ø 50 mm)
- Testing Table (Ø 40 mm with V" Groove for round Jobs Ø 6 to45 mm
- Steel Ball indenter 1/16”
- Test Block HRC
- Test Block HRB
- Steel Ball Ø 1/16”
- Allen Spanners
- Clamping Device
- Rubber Bellow
- Instruction Manual
Software Description
Download Cataloge
ENQUIRY
Benchtop Hardness Tester
Description
Manual Rockwell hardness tester apply to test the hardness of metal materials. It has stable and reliable performance, it is economical Rockwell machine without electric power supply.
Application
Hardened steel, quenched and tempered steel, annealing steel, bearing steel, strip steel, hardened steel sheet, hard alloy, etc
Features
Specifications
| Technical Specifications | RH-150A |
| Rockwell scale | HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HRL, HRM, HRR |
| Conversion scale | Conversion table |
| Preliminary test force | 10Kg(98N) |
| Total test force | 60Kg (588N), 100Kg (980N), 150Kg (1471N) Tolerance range:±1.0% |
| Resolution | 0.5HR |
| Hardness value range | HRA:20∼88 HRB:20∼100 HRC:20∼70 |
| Hardness data read | Dial |
| Loading method | Manual |
| Dwell time | Manual |
| Allowed specimen measurement space | Maximum height :155mm Maximum throat depth:135mm |
| Size / weight | Instrument size:455*175*610mm (L⨯W⨯H) Net Weight: 65kg |
| Executive standard | GB/T230.2, ASTM E18, ISO 6508, JJG112 |
Accessories
- Rockwell hardness tester host: 1 set
- Diamond Rockwell indenter:1 pc
- 1.588mm diameter hard alloy steel ball indenter :1 pc,
- Standard hardness block: 4 pcs
- Large testing table: 1 pc
- Medium testing table: 1pc
- V-shape testing table: 1pc
- 1.588 mm diameter steel ball :5 pcs
- Dust-proof cover: 1 pc, Accessory case :1 pc
- Operating instruction :1pc Quality certificate :1 pc
- Hardness conversion table:1pc Warranty card :1 pc
Software Description
Download Cataloge
ENQUIRY
Benchtop Hardness Tester
Description
Rockwell Hardness Testing Machine is manufactured under strict quality control at all manufacturing stages. This model is suitable for testing hardness of metals and alloys of all kinds, hard or soft whether flat or round etc. or of irregular shape. This model is having superior design to that of existing conventional Rockwell Hardness Testers &easy to operate still quite sensitive &accurate
Application
Features
- Machine is having different Taper front look and superior aesthetic look over conventional Rockwell Hardness Tester.
- Unidirectional Big Dial type auto load selection knob for load selection of loads 60,100 &150 kgf.
- Most of the important parts are plated to avoid rusting.
- An antifriction linear bearing is fixed in Hardened & ground stepped bush which will provide perfect vertical movement of diamond holder. Thus the testing of small pin or ball upto 3mm dia is possible.
- All models conform to -
- IS : 1586, BS 10109-2, ASTM-E-18 & ISO : 6508-2 for Rockwell Test.
- LCD Graphical Display with 128 x 64 pixels & Results are displayed in BIG Font size
- Minor load is graphically displayed on LCD screen (Minor load auto brake system)
- Provision of Numbers. of tests, mean, standard deviation, maximum, minimum range, individual test hardness numbers in PC Software.
- Dwell Time setting for MAJOR Load 1 to 99 sec & MINOR load dwell time is 1-30 sec.
- 75 Results are stored in the system with automatic result data storage.
- User can enable auto save results storage in system or disable it.
- User can select appreciate scale according to weight selected.
- Motorized Automatic Loading or Manual Loading is selectable.
- Conversion of results from Rockwell to Brinell (HB) , Vickers (HV), Knoop (HK), Tensile Strength (KSI),
- Serial Port for Dot Matrix Printer or EPSON LX 300 +(optional).
- Print result consists of Serial No. Hardness Value and Hardness Scale
Specifications
| Test Loads (Kgf) | 60,100,150 |
| Initial Loads (Kgf) | 10 kgf. |
| Max. Test Height (mm) | 220 |
| Depth of Throat (mm) | 130 |
| Size of base (mm) approx | 600 * 200 |
| Machine height (mm) | 850 |
| Net weight (approx kg) | 90 kg. |
Accessories
- Rockwell Diamond Indenter
- Testing table dia 50 mm
- Testing table dia 40 mm with “V” groove for round jobs dia 6 to 45 mm
- Steel ball Indenter Dia 1/16
- Test block HRC
- Test block HRB
- Steel ball dia 1/16
- Allen Spanners
- Clamping Device
- Telescopic sleeves for elevating screw
Software Description
Download Cataloge
ENQUIRY
Benchtop Hardness Tester
Description
Digital Rockwell hardness tester apply to test the hardness of metal materials. It has stable and reliable performance, it is economical Rockwell machine without electric power supply.
Application
Hardened steel, quenched and tempered steel, annealing steel, bearing steel, strip steel, hardened steel sheet, hard alloy, etc
Features
Specifications
| Rockwell scale | HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HRL, HRM, HRR |
| Conversion scale | HRA, HRB, HRC, HRD, HRF, HV, HK, HBW, H15N, H30N, H45N, H15T, H30T, H45T |
| Preliminary test force | 10Kg(98.0N) |
| Total test force | 60Kg (588N), 100Kg (980N), 150Kg (1471N) |
| Tolerance range | ±1.0% |
| LCD screen size | 118x99mm |
| Resolution | 0.1HR |
| Hardness value range | HRA:20~88,HRB:20~100,HRC:20~70 |
| Hardness data read | Digital LCD screen |
| Loading method | Automatic (Load, Dwell ,Unload) |
| Dwell time | 1~99S, In a second option |
| Maximum height | 170mm |
| Maximum throat depth | 130mm |
| Size | Instrument size : 460*160*660mm (L⨯W⨯H) |
| Weight | 85kg |
| Power supply | AC220V + 5%, 50~60 Hz |
| Data output | Built-in printer and RS-232 port |
Accessories
- Rockwell hardness tester host: 1 set
- 1.588mm diameter hard alloy steel ball indenter: 1 pc
- Standard hardness block: 3pcs
- Large testing table: 1 pc
- Medium testing table: 1 pc
- V-shaped testing table: 1 pc
- 1.588 mm diameter steel ball : 5 pcs
- Power cable: 1 pc
- Dust-proof cover: 1 pc
- Operating manual : 1book
Software Description
Download Cataloge
ENQUIRY
Benchtop Hardness Tester