- Home
- Products
- Hardness Tester
- Combined Hardness Tester


Description
- Table Top sturdy Model
- Front projection screen with Micrometer with Optical system List Count of 0.0005 mm
- Motorized Loading & Unloading of Loads
- Load selection By Indexible Load Selection Knob
- Very wide testing range from very soft Metals to Very Hard Metals
- Models with minimum 1 Kg Load are available
- The illumination light goes off during the application of Load which reduces the operator's fatigue due to continuous light illumination as well as increases Bulb life
- State of Art Load Damping system for a very smooth & Jerk free Loading & unloading of applied Load
- Machine Confirms to IS: 1754-2002 for Vickers & IS: 2281-2005 / BS240 for Brinell.
Application
Features
Specifications
MODEL | BTV-250 | BTV-250-S |
Test Loads (Kgf) | 5, 10, 20, 30, 50 for Vickers 62.5, 187.5, 250 for Brinell |
1, 5, 10, 20, 30, 50 for Vickers 62.5, 187.5, 250 for Brinell |
Maximum Test height (mm) | 200 mm | |
Depth of throat (mm) | 150 mm | |
Weight Approx. (Kgf) | 180 | |
Dimension L x W x H mm | 660x250x850 mm | |
Connected Load | 0.1 KVA, 1 Phase AC, 220V, 50 Hz |
Accessories
- Flat Table of 100mm Dia
- Vee Table for Specimen- 6 to 80 mm Dia
- Vickers Diamond Indenter
- Ø2.5, 5mm Ball Indenter
- Ø2.5, 5mm Steel Balls
- Vickers test block
- Brinell test block
- Electrical Cord
- Instruction Manual
Software Description
Download
ENQUIRY
Benchtop Hardness Tester


Description
Rockwell Hardness Testing Machine is manufactured under strict quality control at all manufacturing stages. This model is suitable for testing hardness of metals and alloys of all kinds, hard or soft whether flat or round etc. or of irregular shape. This model is having superior design to that of existing conventional Rockwell Hardness Testers &easy to operate still quite sensitive &accurate
Application
Features
- Machine is having different Taper front look and superior aesthetic look over conventional Rockwell Hardness Tester.
- Unidirectional Big Dial type auto load selection knob for load selection of loads 60,100 &150 kgf.
- Most of the important parts are plated to avoid rusting.
- An antifriction linear bearing is fixed in Hardened & ground stepped bush which will provide perfect vertical movement of diamond holder. Thus the testing of small pin or ball upto 3mm dia is possible.
- All models conform to -
IS : 1586, BS 10109-2, ASTM-E-18 & ISO : 6508-2 for Rockwell Test. - LCD Graphical Display with 128 x 64 pixels & Results are displayed in BIG Font size
- Minor load is graphically displayed on LCD screen (Minor load auto brake system)
- Provision of Numbers. of tests, mean, standard deviation, maximum, minimum range, individual test hardness numbers in PC Software.
- Dwell Time setting for MAJOR Load 1 to 99 sec & MINOR load dwell time is 1-30 sec.
- 75 Results are stored in the system with automatic result data storage.
- User can enable auto save results storage in system or disable it.
- User can select appreciate scale according to weight selected.
- Motorized Automatic Loading or Manual Loading is selectable.
- Conversion of results from Rockwell to Brinell (HB) , Vickers (HV), Knoop (HK), Tensile Strength (KSI),
- Serial Port for Dot Matrix Printer or EPSON LX 300 +(optional).
- Print result consists of Serial No. Hardness Value and Hardness Scale
Specifications
Test Loads (Kgf) | 15, 30, 45, 60, 100, 150 |
Initial Loads (Kgf) | 3 kgf. For superficial test 10 kgf. for Rockwell |
Max. Test Height (mm) | 220 |
Depth of Throat (mm) | 130 |
Size of base (mm) approx | 600 * 200 |
Machine height (mm) | 850 |
Net weight (approx kg) | 90 kg. |
Accessories
- Rockwell Diamond Indenter
- Superficial Diamond Indenter
- Testing table dia 50 mm
- Testing table dia 40 mm with “V” groove for round jobs dia 6 to 45 mm
- Steel ball Indenter Dia 1/16
- Test block HRC
- Test block HRB
- Test block Rockwell Superficial 30N
- Steel ball dia 1/16- 5 nos
- Allen Spanners- 3 nos
- Clamping Device
- Telescopic sleeves for elevating screw- 1 set
Software Description
Download
ENQUIRY
Benchtop Hardness Tester


Description
Our BRB Hardness Testers are designed and developed after years of research & experience in this field. All the models are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. These models strictly conform to IS: 1586-2000, BS: 891part 1&2
Application
Features
Specifications
Test Loads (Kgf) | 60, 100, 150 (Rockwell) 187.5 (Brinell) 250 (Brinell) |
Initial Loads (Kgf) | 10 |
Max. Test Height (mm) | 215 |
Depth of Throat (mm) | 132 |
Max. Depth of Elevating Screw Below Base (mm) | 230 |
Size of Base (mm) (Approx.) | 430 X 180 |
Machine Height (mm) | 635 |
Net Weight kg. (Approx.) | 65 |
Accessories
- Rockwell Diamond Indenter
- Testing Table (Ø 50 mm)
- Testing Table (Ø 40 mm with V" Groove for round Jobs Ø 6 to45 mm
- Steel Ball indenter 1/16”
- Test Block HRC
- Test Block HRB
- Steel Ball Ø 1/16”
- Allen Spanners
- Clamping Device
- Rubber Bellow
- Instruction Manual
Software Description
Download
ENQUIRY
Benchtop Hardness Tester


Description
Our BRS Hardness Testers are designed and developed after years of research & experience in this field. All the models are manufactured under strict quality control at all manufacturing stages.
These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. These models strictly conform to IS: 1586-2000, BS: 891part 1&2
Application
Features
Specifications
Test Loads (Kgf) | 60, 100, 150 (Rockwell) 187.5 (Brinell) |
Initial Loads (Kgf) | 10 |
Max. Test Height (mm) | 215 |
Depth of Throat (mm) | 132 |
Max. Depth of Elevating Screw Below Base (mm) | 230 |
Size of Base (mm) (Approx.) | 430 X 180 |
Machine Height (mm) | 635 |
Net Weight kg. (Approx.) | 65 |
Accessories
- Rockwell Diamond Indenter
- Testing Table (Ø 50 mm)
- Testing Table (Ø 40 mm with V" Groove for round Jobs Ø 6 to45 mm
- Steel Ball indenter 1/16”
- Test Block HRC
- Test Block HRB
- Steel Ball Ø 1/16”
- Allen Spanners
- Clamping Device
- Rubber Bellow
Instruction Manua
Software Description
Download
ENQUIRY
Benchtop Hardness Tester


Description
Our BSM Hardness Testers are designed and developed after years of research & experience in this field. All the models are manufactured under strict quality control at all manufacturing stages.
These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. These models strictly conform to IS: 1586-2000, BS: 891part 1&2
Application
Features
Specifications
Test Loads (Kgf) | 60, 100, 150 (Rockwell) | 15,30,45 (Rockwell Superficial) |
Initial Loads (Kgf) | 10 (Rockwell) | 3 (Rockwell Superficial) |
Max. Test Height (mm) | 295 | |
Depth of Throat (mm) | 148 | |
Max. Depth of Elevating Screw Below Base (mm) | 290 | |
Size of Base (mm) (Approx.) | 475 X 220 | |
Machine Height (mm) | 865 | |
Net Weight kg. (Approx.) | 125 |
Accessories
- Flat anvil Ø 25mm
- V-anvil Ø 25mm (Kgf)
- Test Block HRC
- Test Block HRB
- Diamond indentor
- 1/16" Ball indentor
- Steel Ball Ø 1/16"
Software Description
Download
ENQUIRY
Benchtop Hardness Tester